COMPONENT SYSTEM 06 / 4 PRACTICAL CHECKLISTS

Payloads & integrationBegin with the interfaces.

Share the civilian inspection, survey or imaging workflow. Payload mass, power, mounting, control and data handling all affect integration.

Discuss payloads & integration All eight systems

A purchasing guide, not live inventory. Use these checklists to describe your requirements. We review candidate parts, supplier information and commercial terms for your project; your technical team confirms the final fit.

01 / PAYLOADS & INTEGRATION

Cameras & imaging modules

Capture imagery for a defined civilian observation or measurement workflow.

Request part options : Cameras & imaging modules

01 Parameters to provide

  • Imaging type, resolution, frame rate and lens needs
  • Trigger, time synchronisation and data interfaces
  • Storage, output format and processing workflow
  • Power, mass, envelope and mounting requirements
  • Operating temperature and intended scene conditions

02 Still to confirm

  • Image / measurement performance in the intended use
  • Software access, lens options and calibration evidence

Review these points with the supplier against the exact proposed part.

02 / PAYLOADS & INTEGRATION

Gimbals & stabilisation

Orient or stabilise a known camera or sensor payload.

Request part options : Gimbals & stabilisation

01 Parameters to provide

  • Payload mass, dimensions and centre of gravity
  • Axis count, travel range and stabilisation needs
  • Mount pattern, clearance and vibration isolation
  • Control protocol, video path and cable routing
  • Supply voltage, current and environmental exposure

02 Still to confirm

  • Performance with the exact payload and balance setup
  • Flight-controller support and mechanical travel clearance

Review these points with the supplier against the exact proposed part.

03 / PAYLOADS & INTEGRATION

LiDAR & scanning sensors

Collect distance or point-cloud data for a defined survey or inspection task.

Request part options : LiDAR & scanning sensors

01 Parameters to provide

  • Range, accuracy, field of view and scan rate needs
  • Target surface, lighting and operating conditions
  • Timing, GNSS / IMU integration and data interfaces
  • Power, storage rate, mass and mount envelope
  • Processing software, calibration and output format

02 Still to confirm

  • Performance on the intended targets and trajectory
  • Calibration workflow, processing access and safety documentation

Review these points with the supplier against the exact proposed part.

04 / PAYLOADS & INTEGRATION

Payload mounts

Attach, align and service a payload on a specified airframe.

Request part options : Payload mounts

01 Parameters to provide

  • Airframe and payload interface drawings
  • Payload mass, centre of gravity and load assumptions
  • Alignment, stiffness and vibration-isolation needs
  • Quick release, locking and cable-clearance needs
  • Material, finish and dimensional tolerances

02 Still to confirm

  • Fit and load evidence for the complete assembly
  • Retention, alignment repeatability and installation procedure

Review these points with the supplier against the exact proposed part.

MAKE THE ENQUIRY ACTIONABLE

What to send with your brief.

An incomplete brief is fine. Mark unknowns clearly so they can be resolved before a purchase decision.

  1. Project contextCivilian application, destination, operating conditions and your integration role.
  2. Part definitionManufacturer and model / revision, or a non-confidential custom-part summary. Note acceptable alternatives; agree sharing arrangements before sending detailed drawings.
  3. Procurement needsQuantities, required date, sample or production intent, and documentation / inspection expectations.
  4. Interfaces & evidenceConnected hardware and software, existing drawings, and the test or acceptance evidence your team needs.

FROM YOUR REQUIREMENT TO A SUPPLY PROPOSAL

Send the requirement.
We’ll coordinate the options.

Share the part reference, quantity and destination. We’ll review sourcing feasibility, request the missing details and work towards a quotation with clear inclusions, lead time and supply responsibilities.

Send your requirement Return to the directory